MONARCH 1.81"x1968' (46mm X 600M) Wax Ribbon (Resin Enhanced) for 9800 9820 9825 9830 9835 9850 9855 9855 RFMP SERIES Coated SIde OUT (CSO) COMPATIBLE on SPECIALTY PLASTIC CORE for Polypropylene Synthetic paper Polyethylene Polyolefin Kimdura & More

MONARCH ADTP1 / 9800 Series Paxar Printer Series RESIN ENHANCED WAX RIBBON 

IMPORTANT NOTE: Monarch 9800 Series printers have unique plastic spindles with three equally spaced grooves. They require thermal transfer ribbons wound on specially-designed cores with corresponding splines. 

When installed properly, this matched set of spindle grooves and core splines securely locks the ribbon in place and prevents movement of the ribbon on the spindle during printing.

The thermal transfer ribbon must be lined up correctly to slide onto the spindle. A slight resistance may be felt over the last 1/4" of engagement as the ribbon's core grips the printer's spindle, but the ribbon must be pushed completely onto the spindle to prevent any shifting or "walking" during printing.

FOR MONARCH PAXAR PRINTERS : ADTP1, MONARCH 98xx, MONARCH 9805, MONARCH 9820, MONARCH 9825, MONARCH 9830, MONARCH 9835, MONARCH 9840, MONARCH 9850,  MONARCH 9855, MONARCH 9856, MONARCH 9870, etc.

NOTE : These ribbons have A SPECIALLY MADE PLASTIC CORE DESIGNED SPECIFICALLY FOR USE IN MONARCH PAXAR PRINTERS.

 Available widths for Monarch ADTP1 / 9800 Series: 55mm, 80mm, 84mm, 110mm and Custom 

 Available lengths for Monarch ADTP1 / 9800 Series UPTO 600 meters

COMPATIBLE RIBBON -

1.81" x 1968'  1.81x1968  1.81"x1968'  1.81 in X 1968 ft Black  RESIN ENHANCED WAX RIBBON

Compatible with Industrial printers

Rolls per Case: 24

GENERIC BRAND COMPATIBLE

NOT MADE BY MONARCH